ESP32 WiFi reason 2: AUTH_EXPIRE
Reason 2 means the authentication is no longer valid. What that tells you depends on whether the ESP32 is the station or the access point.
WIFI_REASON_AUTH_EXPIRE (2). Espressif's description: Authentication expired.
On an ESP32 station
- While connecting: the access point did not answer the authentication request in time. Weak signal, or an access point that is busy or ignoring the station.
- While connected: the access point sent it and deauthenticated the station. Its own log usually says why.
On an ESP32 soft-AP
Espressif lists three cases: the AP has not received anything from the station for five minutes, the AP was stopped with esp_wifi_stop(), or the station was removed with esp_wifi_deauth_sta().
Where you see the number
In ESP-IDF, the WIFI_EVENT_STA_DISCONNECTED event carries it: ((wifi_event_sta_disconnected_t *) event_data)->reason. In Arduino, the ARDUINO_EVENT_WIFI_STA_DISCONNECTED event has it in info.wifi_sta_disconnected.reason, and WiFi.disconnectReasonName() turns it into a name. Log it every time: the reason is what separates a wrong password from a weak signal.
When it happens at a customer's site
On your desk you see the reason in the log. On a device behind someone else's router you only hear that it "goes offline sometimes". Pinscope keeps the device's logs and its WiFi signal over time, so you can see which reason it disconnected with and whether the signal was dropping before it did. Free for three devices. Remote logging.
Related errors: WiFi reason 8: ASSOC_LEAVE · WiFi reason 200: BEACON_TIMEOUT · WiFi reason 15 / 204: handshake timeout · WiFi disconnect reasons. All ESP32 errors: the list. Reason codes and their meaning from Espressif's Wi-Fi Driver guide and esp_wifi_types.h.
More
- Remote access to an ESP32 without TLS: what it measured and what it costs
- Reaching an ESP32 web server from outside its network
- Updating ESP32 firmware over the internet, with rollback
- Guru Meditation Error: decoding the backtrace, and crashes from the field
- Remote logging: ESP_LOG without a serial cable
- Heap and stack monitoring in the field
- An ESP32 behind CGNAT, 4G or Starlink
- TLS memory usage on the ESP32, and how to reduce it
- Sharing an ESP32 sensor page with anyone, without port forwarding
- ArduinoOTA over the internet, with a rollback
- ESP32 remote access compared: port forwarding, ngrok, Cloudflare Tunnel, Tailscale
- esp_http_server slow? The 250 ms delay and the fix
- Before the first ESP32 ships: a field support checklist
- ESP32 exception decoder: a Guru Meditation backtrace to lines, in the browser